Print View

Your printed page will look something like this.

https://www.trendsetterengineering.com/tcs-tooling/

TCS Tooling

  • Clamp Connector Debris Covers
    • Fit all size TCS and TC2 Inboard Hubs
    • Intended for surface use, but subsea capable over short periods
    • Polypropylene construction resistant to shocks and weather
    • If needed, operable with T-Handle
    • Stainless fasteners
    • Vent Holes
  • Hub Cleaning Tool
    • Polymer nose cone aligns tool into bore of hub without risking damage to the gasket prep surface.
    • Scotch Bright scouring strips are clamped between components of tool; fasteners are positioned to prevent accidental dropping down hole.
    • ROV Handle per API 17H, ¾” braced rod.
    • Available for TC2 and TCS Assemblies
  • Draw Down-Jack Up Tool
    • Easily-operable tool for:
      • Drawing down and landing connectors that have become accidentally wedged during normal installation
      • Jacking up connectors to facilitate subsea gasket change operations
    • Contingency tool: not required to be deployed for normal connector landing or alignment.
    • API 17H Type A Dual Port Hot Stab ROV Interface
    • Actuated via 1/4-turn ROV Operable Ball Valve (36 lb-ft max torque)
  • Clamp Connector Gasket Replacement Tools
    • Sled-Based design that is configured for gasket installation or retrieval.
    • Sled is inserted via ROV into the outboard Alignment Funnel window of the connector
    • Mechanical Jack is actuated via ROV API 17H hot stab that operates a hydraulic motor.
    • TC2 Gasket Replacement Stab also available
  • TC2 Secondary Override Tool
    • In the event of the 2” horizontal connector unlock operation fails, the override tool is designed to unlock the connector through means of hydraulic cylinders via ROV
    • In the event of the 2” horizontal connector unlock operation fails, the override tool is designed to unlock the connector through means of hydraulic cylinders via ROV
    • Override tool is sent subsea via downline and guided by ROV over the TC2 connector